How to Factory Reset Arlo Video Doorbell (Step-by-step Guide)

Are you finding trouble in connecting your Arlo Video Doorbell to Wi-Fi? Or you just want to troubleshoot other technical issues. Whatever your reason to factory reset your Arlo Video Doorbell; we will show you exactly how to achieve it in the easiest steps possible. We have also created other guides around the Arlo video doorbell and other security cameras you may want to consider in the links below:

Here is the trick: performing a factory reset on your Arlo Video Doorbell can be helpful in several situations, such as preparing it for resale or resolving configuration problems. If you’ve encountered problems during the initial setup or configuration of your Arlo Video Doorbell, reseting it can clear any incorrect settings or configurations, allowing you to start fresh and set it up correctly.

Note:

Before resetting your Arlo video Doorbell, you must know that the action will set the device back to factory reset.

The video Doorbell will also be completely removed from your Arlo account. That means you will have to reconnect it back using the Arlop app.

How to Factory Reset Arlo Video Doorbell

Depending on the model of your Arlo video Doorbell, here are the two methods you can use to hard reset your device back to factory settings:

Method one: Using the Reset Button

Some model of Arlo video Doorbell come with a reset button located at the back. All you need to do is to press this button as instructed below. Note that you can use this method in case the Arlo video Doorbell is offline.

On the back or bottom of your Arlo Video Doorbell, you should find a small button. It is usually recessed to prevent accidental presses.
Use a release pin to press and hold this reset button for about 15 seconds. You may need to use some force, as the button is often small and recessed.
The LED ring around the doorbell button on the front of the device flashes
Observe the LED indicator on the doorbell. It will flash white when it successfully begins the reset process.
Now release the reset button. The LED indicator may change again to confirm that the factory reset has been completed.
Allow the Arlo Video Doorbell a few moments to complete the reset process. The LED indicator may continue to blink or change colors during this time.

That is it. Your Arlo Video Doorbell will be fully reset to factory settings. Note that you will need to set it up again from scratch. Follow the initial setup instructions provided in our recent guide to connect the doorbell to your Wi-Fi network and configure any settings or preferences.

Method one: Using the Arlo App

Alternatively, depending on the model of your Arlo video Doorbell, you can also use the Arlo app to reset the doorbell back to factory settings as we have illustrated below. However, keep in mind that this method only works if the Arlo Video Doorbell is online.

Assuming that you have the Arlo app and a registered account, launch the Arlo app on your mobile device
Go to Device setting
Tap my Devices
Now select the Video Doorbell you intend to factory reset
On the Device Settings screen, scroll down to the bottom and tap Remove Device. This action will automatically reset your doorbell.

Conclusion

In conclusion, resetting your Arlo doorbell is a straightforward process. All you need to do is to press and hold the Reset button on the back of the Arlo Video Doorbell for about 15 seconds. When the LED in front of the device flashes amber, that indicates the reset process has successfully began. So, give the doorbell some time to complete the reset and when you see the LED turning to blue, it means the reset is complete and the doorbell is ready for pairing.

We hope this guide has helped understand the simple tricks and steps to follow while resetting your Arlo video doorbell. In case you need more assistance, kindly check our FAQ section for some of the common questions and answers.

Frequently Asked Questions

How to factory reset an Arlo doorbell?

Resetting your Arlo doorbell is a straightforward process. All you need to do is to press and hold the Reset button on the back of the Arlo Video Doorbell for about 15 seconds. When the LED in front of the device flashes amber, that indicates the reset process has successfully began. So, give the doorbell some time to complete the reset and when you see the LED turning to blue, it means the reset is complete and the doorbell is ready for pairing.

How do I reset my Arlo to factory settings?

You can reset your Arlo back to factory settings by simply: Press Reset button on the back of the Arlo SmartHub or Base Station for 10 seconds >>> Wait for the LED on the front of the Arlo SmartHub to light >>> When it stops, the reset process is complete.

How to restart Arlo doorbell from app?

You can also reset your Arlo video doorbell using the mobile app in case your doorbell is online. To do this, simply Open the Arlo app on your mobile device >>> Go to Device setting >>>Tap my Devices >>> Select the Video Doorbell >>> Tap Remove Device to successfully reset your doorbell.

How do I get my Arlo doorbell back online?

In case your Arlo doorbell ever goes offline abruptly, here are the step you can follow to troubleshoot it back online. First ensure your Arlo base station is on and running ( Green LED light should be on) >>> Ensure the internet LED is lit green indicating that your Arlo base station is connected to the Internet >>> Check if your Arlo Audio Doorbell is powered on >>> If all this working well, you will need to reset your Arlo doorbell by pressing the reset button for 10 seconds and leaving it to reset.

How to reconnect Arlo doorbell to Wi-Fi?

To connect your Arlo doorbell to Wi-Fi, simply Open the Arlo Secure App >>> Go to Setting >>> Proceed to My Devices >>> Now Select the Arlo Doorbell >> And Tap Wi-Fi Network >>> Finally tap on Change Network and select from the list of available networks

How do I reset my Arlo remotely?

You can also reset your Arlo video doorbell remotely using the mobile app in case your doorbell is online. To do this, simply Open the Arlo app on your mobile device >>> Go to Device setting >>>Tap my Devices >>> Select the Video Doorbell >>> Tap Remove Device to successfully reset your doorbell.

How do I reactivate my Arlo doorbell?

If your subscription plan ever expires and your Arlo doorbell camera is deactivated, here is how to activate it again. Simply Open the Arlo Android app >>> Then log in to your Arlo account >>> Tap on Settings >>> Proceed to Subscription >>> Then go to Manage Cameras and activate them.