How to install Arlo Wireless Doorbell for Home Security

The Arlo Wireless doorbell is an amazing piece of security component that will take your home surveillance needs to another level. These smart doorbells come equipped with an HD video camera with night vision and motion detection systems that are capable of protecting your front door. If you have just purchased your new Arlo Wireless Doorbell, this guide will help you learn how to install it on your door to upgrade your home security.

For those that don’t know already, the Arlo Wireless Doorbell connects to your home’s Wi-Fi network, eliminating the need for complicated wiring during installation. This wireless design makes it easy to set up and install in various locations around your home. If you need a detailed review of the Arlo Smart Doorbell, check out our review guide now.

How to install Arlo Wireless Doorbell at home

The process of installing the Arlo Wireless Doorbell in any location of your home is straightforward. However, before you start the installing process, ensure that the following are readily available:

Stable Wi-Fi connection at your front door
Arlo Wireless Doorbell battery is fully charged
You have downloaded and installed the Arlo app on your smartphone or tablet.

If you are sure the above requirements are present, then follow the steps below to install your Arlo smart Doorbell on your front door or any other location at home:

Step one: Prepare Your Arlo Account

First, you will need to prepare your Arlo account using the app. So, open the Arlo app and log in to your Arlo account. If you don’t have an account, you’ll need to create one.

Step Two: Add Device

Now go ahead and add a device using the Arlo app. To achieve this, simply got to the Arlo app and tap on the “Add Device” option. Finally, Select “Doorbells” from the list of Arlo devices.
The app will guide you through the setup process. Follow the on-screen instructions to set up your Arlo Wireless Doorbell.
Make sure to follow the instructions carefully, as they may vary slightly depending on your specific model of Alro wireless Doorbell.

Step Three: Install the Mounting Plate

Now, choose a suitable location near your front door where you want to install the Arlo Wireless Doorbell.
Use the included mounting plate and screws to secure the doorbell to the wall or doorframe. Make sure it’s securely attached.
Once the mounting plate is installed, place the Arlo Wireless Doorbell onto the mounting plate. Please, ensure that the doorbell snaps securely into place.

Step Four: Connect to Wi-Fi & test the Doorbell

Follow the app’s instructions to connect the doorbell to your Wi-Fi network. Remember to provide your Wi-Fi network credentials during this step.
After the doorbell has connected to Wi-Fi, test it to ensure it’s working correctly. For instance, press the doorbell button to verify that it triggers notifications on your smartphone or tablet.
You can also choose to customize your Doorbell’s settings using the Arlo app. For instance, you can adjust motion detection sensitivity, notification preferences, and other settings according to your preferences.

That is it. Your Arlo wireless Doorbell is now fully installed, ready to notify you of anyone at your front door. We hope our user manual on how to install your new Arlo Wireless Doorbell has helped to successfully get the job done. If you encounter any issues during the installation process, refer to the user manual or contact Arlo customer support for assistance.

Frequently Asked Questions

How do you remove Arlo camera from mount?

To remove Arlo camera from mount, simply Get hold of the release pin that came along with your Arlo video Doorbell >>> Insert the pin into the pinhole at the top or bottom of the doorbell mount >>> You will hear a clicking sound and your doorbell will be released from the mount >>> Just pull off the doorbell from the mount and that is.

How to factory reset Arlo doorbell?

You can reset your Arlo back to factory settings by simply: Press Reset button on the back of the Arlo SmartHub or Base Station for 10 seconds >>> Wait for the LED on the front of the Arlo SmartHub to light >>> When it stops, the reset process is complete.

How do I reset my Arlo remotely?

You can also reset your Arlo video doorbell remotely using the mobile app in case your doorbell is online. To do this, simply Open the Arlo app on your mobile device >>> Go to Device setting >>>Tap my Devices >>> Select the Video Doorbell >>> Tap Remove Device to successfully reset your doorbell.

How to remove Arlo doorbell without release pin?

To remove Arlo camera from mount without release pin, simply use a straightened paperclip >>> Insert the straightened paperclip into the pinhole at the top or bottom of the doorbell mount >>> You will hear a clicking sound and your doorbell will be released from the mount >>> Just pull off the doorbell from the mount and that is.

How do I reset my Arlo remotely?